Crystal Quest
Acid Neutralizing Whole House Water Filter
Acid Neutralizing Whole House Water Filter
Free shipping on orders $150+ to the contiguous US. Orders under $150 ship for a flat $8.
Couldn't load pickup availability
- 30-day returns on eligible unused, uninstalled items. Return policy
- Ships direct from the manufacturer, with tracking emailed to you
- Secure checkout with Shop Pay, Apple Pay and Google Pay
- Questions about this system? Contact our team
Overview
Low-pH water can be corrosive to plumbing and fixtures. This system uses crushed, screened white marble (calcium carbonate) that slowly dissolves to raise acidic water toward neutral, with a sediment pre-filter and a carbon post-filter around the neutralizing tank.
Crystal Quest specifies this system for acidic water below pH 6.8, so measure your pH first. The media may raise hardness after neutralizing, and an optional softener or SMART filter can be added.
Key features and benefits
- Calcium carbonate neutralizing media, designed to raise acidic (low-pH) water toward a neutral, less corrosive level.
- Automatic backwash to prevent the bed from compacting.
- 20" sediment pre-filter and 20" carbon post-filter included.
- Fiberglass or stainless steel tank options.
Household sizing and water compatibility
- 1.5 cu ft: 9-11 GPM service flow, 750,000 gallons, 10" x 54" tank.
- 2.0 cu ft: 10-13 GPM service flow, 1,000,000 gallons, 12" x 52" tank.
- Designed for water below pH 6.8, per the manufacturer.
- Water source: no city- or well-water restriction is published; the documented limit is water with a pH below 6.8.
Technical specifications
- Media volume: 1.5 or 2.0 cubic feet.
- Treats acidic water below pH 6.8.
- Automatic backwash.
- Tank material: fiberglass or stainless steel.
- With a softener: 18" x 33" brine tank, 48,000 grains (1.5 cu ft) or 60,000 grains (2.0 cu ft).
Installation requirements
- Crystal Quest requires installation by a licensed plumber. In AR, CA, GA, KS, MA, MI, MN, OK, RI, SC, SD, TX, VT and WI, a state-registered installer or contractor may also be allowed. The installation must meet local plumbing, electrical and sanitation codes.
- Power: a non-switched 110/120 V, 60 Hz outlet on a circuit with a 20 A fuse or breaker, within reach of the power cord. Do not use an extension cord.
- Drain: 1/2-inch inside-diameter drain tubing for runs up to 20 feet; for a longer run, use 3/4-inch tubing for the whole length.
- Water pressure: at least 20 psi. A pressure regulator is required ahead of the system if pressure, including spikes, could exceed 60 psi; without one the warranty is void.
- Cold water line only, installed before the water heater. Water above 100°F damages the system.
- Indoors only, protected from freezing, rain, flooding and direct sunlight, with room around the tanks for servicing. Pipe and shut-off valves are not included.
- A vacuum breaker, installed inline ahead of the system, and a leak detector valve are recommended by the manufacturer.
- Fiberglass is recommended in humid conditions or where salt is present.
Maintenance and replacement
- Neutralizing media needs refilling about every 2-3 years, depending on water use and the pH of your raw water.
- Sediment and carbon cartridges: replace every 12-24 months.
Delivery
- Free freight delivery to residential addresses in the contiguous 48 states, with $0 shipping at checkout.
- Ships directly from Crystal Quest by freight truck. Listed shipping weights run from about 260 to 490 lb depending on configuration.
- Delivery is curbside, to an accessible spot at the curb or end of the driveway. The carrier arranges liftgate service and a delivery appointment when needed. Carrying the system indoors and unpacking are not included.
- We email tracking details when your order ships. Transit times vary by carrier and location, so we don't promise a specific delivery date.
- Inspect the cartons on arrival and note any visible damage on the delivery receipt before signing. Take photos, keep all packaging and contact us within 24 hours.
- Free freight covers residential addresses only. We can't currently ship this system to Washington, DC, Alaska, Hawaii, U.S. territories, APO/FPO or international addresses. Contact us before ordering if you need delivery to a business address.
Installation
- Installation is not included. PureWell Home recommends installation by a licensed plumber, following the manufacturer's instructions and local plumbing codes.
Warranty
- Covered by the Crystal Quest Limited Warranty: 1 year on parts, starting on the delivery date.
- Registering the system with Crystal Quest in its first year extends coverage: media tank and control-valve body for as long as you own the home; valve circuit board, display and power supply 8 years; drive motor and gears 5 years; housings, brackets, bypass, brine tank and fittings 5 years.
- The warranty repairs or replaces parts and does not cover labor. Full terms and exclusions are in Crystal Quest's warranty.
Returns
- Unused, uninstalled systems in their original packaging can be returned within 30 days of delivery with a return authorization from us. Return freight is paid by the customer, and we'll confirm the cost before you ship anything back. Details are in our Return, Refund & Cancellation Policy.
Specifications and reduction targets are the manufacturer's. Results vary with your water, so test it before and after installation.
Shipping & delivery
Shipping & delivery
Free shipping on orders of $150 or more; orders under $150 ship for a flat $8. We ship to the contiguous 48 states.
Most orders ship directly from the manufacturer. Processing usually takes 1–2 business days (an estimate, not a guarantee), and tracking is emailed when your order ships. If an item is unavailable or delayed, we contact you with your options, including a full refund.
Returns
Returns
Eligible items can be returned with a request made within 30 days of delivery, subject to the conditions in our policy.
Not sure this is the right fit?
Not sure this is the right fit?
We are happy to help you check before you order. Call (718) 219-5687 (Mon–Fri, 9 AM–5 PM ET) or email purewellhome@gmail.com with your current model number, a photo of your filter, or your water test results.
Share
